|
easyStockConverter - First Steps
|
|
Preface |
|
This guide is a brief introduction in how to use this module. If you don't find the help you looking for, do not hesitate to contact us.
Most controls have tool tip text. In order to obtain the tool tip help, move the mouse pointer over the control you need more details on, and leave the mouse for a short time un-moved, until the help text pops-up.
|
|
Step 1 |
|
Start the converter module from the Commander Panel - one left mouse click. Wait until the module is completely loaded.
|
|
¨
|
|
Step 2 |
|
Arrange the window at your convenience. Size and location of the module window will be saved to the setting file.
|
|
|
|
Step 3 |
|
Start to setup up the 'Date Input Setting' panel. If you have installed the software with the setup wizard, all the settings are OK for the ESD downloader data (ex. correct historical data folder, data format layout matching fields, data divider etc.).
|
|
Step 4 |
|
Setup the 'Data Output Setting'. Specify the data output folder.
Make sure that you have all the data fields you need.
Set the 'Time Frame Format' to daily, weekly, monthly or yearly format. |
|
Step 5 |
|
In the middle of the converter panel you can specify the filter options between the input and output data flow. The filter options may be set in the tab 'Filter'. If a filter option is set on, the filter announcer label is red.
|
|
|
|
Step 6 |
|
After all is set, click the 'Convert' button and wait until the conversion is completed.
|
|
Function flow chart
1. Data is read from the input folder 2. Filter options are checked against the read data 3. Data is written to the output folder
|
|
If you have further questions contact us.
|
|
Copyright (c) easyStockDater, Inc. 2000 - 2008 |